Skip to content
IMPORTANT: For credit card payments, please contact our support line to manually process your payment.
IMPORTANT: For credit card payments, please contact our support line to manually process your payment.

Free Shipping

Jet-Tech 727E Glasswasher, High-Temp

SKU 727E
Save $1,122.00 Save $1,122.00
Original price $5,280.00
Original price $5,280.00 - Original price $5,280.00
Original price $5,280.00
Current price $4,158.00
$4,158.00 - $4,158.00
Current price $4,158.00
trust

PRODUCT DESCRIPTION AND SPECIFICATIONS

Standard equipment includes:

  • One 16-compartment (4x4) angled section glassware rack
  • One open combination rack for cups, bowls and assorted wares

Optional Accessories:

  • Pressure reducing valve (PRV)
  • Drain water tempering kit

Connecting your new 727

Water Supply

A 3/4" NPT fitting is required with 30 psi. dynamic pressure. A water pressure regulator* may be required. The water flow pressure cannot be less than 30 psi or exceed 30 psi. If the water pressure exceeds the prescribed amount, you will get inconsistent washing temperature, premature failure and thus may void the warranty.

Incoming water temperature must be 140º F (60º C). An easily accessible shut-off valve is recommended, making installation, service and maintenance easier. A flexible drain hose is provided to make installation, servicing and maintenance easier. Make sure that the water is free from calcium and hard water deposits. For these situations, an inline water cartridge system is highly recommended. Build-up of calcium and lime deposits in the washer may occur and servicing will be required on a more frequent basis which will not be covered by the warranty.

Drain

This dishwasher is equipped with an automatic drain pump that will pump the drain water to a maximum height of 36" (0.9 meter). A 1" ID flexible drain hose is supplied to facilitate maintenance and servicing of the machine. It is important not to reduce the size of this hose. A 1" check-valve* may be required. Drain pump equipped machines have a white button on the control panel beside the green power button.

Electrical

A 208-240 volt, 60 Hz, Single Phase circuit is required for this unit. Check the rating plate on the front of the machine for the amp draw. In spite of the fact that the rating plate shows 208 volts, the unit is designed function properly on 208 volts to 240 volts.

The top & back panels must be removed for the electrical hook -up. The top panel is secured by two Phillips head screws. Once the screws are removed, the panel should be slid to the back and lifted. The back panel is also held by two screws. Remove them, pull the bottom away from the machine and lift the panel.

The terminal block is located inside the back cover. Pass the cable through the cable strain relief and connect the wires to the terminals L1 (brown wire), L2 (blue wire) & Ground (yellow & green wire). Replace the top & back L1 Water panels being careful not to pinch or kink any wires or hoses. There should be sufficient cable length to G Allow the machine to be pulled out for service.

IMPORTANT NOTE Reasonable access to and around the machine for service must be provided. Disconnecting of hard plumbing or removal of counter tops or cabinets, etc., for servicing is not covered by warranty.

DO NOT fill dishwasher manually with water. The dishwasher will fill automatically when the power is turned on.

All panels must be replaced on the unit when the installation

Chemical Pumps

The model 727E is supplied with factory installed liquid detergent and rinse additive pumps to automatically dispense during each wash & rinse cycle. Before accessing the bottom section of the dishwasher, make sure that the power is turned off at the source (breaker panel).

The bottom panel can only be removed with a flat tool like a screwdriver

Insert the screw-driver in the gap between the front panel and the side panel. Pry open towards you. Do this on both sides

The red & blue hoses connected to the pumps must be routed out of the bottom of the dishwasher. The red tube is for detergent and the blue tube is for rinse additive. The containers can be either to the right or left of the dishwasher. Perforating the stainless panel is not recommended. The two chemical pumps are factory adjusted to accommodate most installations.

There is a mark on the pump indicating this setting. It is recommended that only qualified personnel alter these settings.

UNDER NO CIRCUMSTANCES should the detergent pump be turned off

Visual Chemical Delivery Verification

The peristaltic chemical pumps are located in the base of the dishwasher. They feature a transparent cylinder (1) to visually see if fluid is passing through the pumps. The pumps are automatically energized during the “initial fill" (when turning on the dishwasher) and “rinse cycle" (after the wash cycle). During this time, the flow indicator (2) will move between the “Min Flow" position and the “Max Flow" position (3) in the cylinder. It is normal for the pumps to cycle on and off.

If the flow indicator (2) does not move during the fill or rinse, no fluid is circulating through the pump. It is recommended not to use the dishwasher until this condition is resolved.

  • ThermoStop™ System – Guarantees 185F (85C) final rinsing temperature, regardless of incoming water temperature
  • OneGO™ – Our electronic control system featuring intelligent software LED interface and multiple function analysis. OneGO™ soft touch buttons allows you to run a selection of three different cycles, all in one easy touch!
  • SmartSelf diagnostics – have all necessary advanced service diagnostics information at your fingertips!
  • EasyGO – Our ‘soft-start’ washing system protects your valuable dishes and glassware from any chippage or breakage
  • EnergyStar qualified – extremely low water and electrical consumption maximizing your profits
  • Model 727E is fully equipped with a built-in booster for high temperature rinse water, automatic peristaltic pumps for both liquid detergent and rinse-additive, and an automatic drain pump that has the exclusive ‘wash-down’ feature at the end of the work day for a self-cleaning operation
  • Body, external housing, wash tank and all chassis component in brushed stainless steel AISI 304 18 gauge
  • Noise 58 DbA due to utilization of double-walled insulated top and side panels
  • Upper and lower wash and rinse jets on revolving arms constructed of stainless steel; easy to remove and clean without the need for tools
  • Integrated AISI 304 18/10 stainless steel booster with insulated lining
  • Safety micro-switch on the door to interrupt wash pump action
  • Reinforced door hinge system
  • Independently-operated heating elements alternating between booster and wash tank
  • Alternating heating resistors reducing maximum absorption thereby reducing energy costs
  • Possibility of built-in or free-standing installation
  • Inner washing chamber with covered corners and one-piece stamped wash tank provides user with the most sanitary environment
  • Wash pump protected with double scrap filters, plus additional filter for overflow tube
  • Door-opening with overall clearance of 10.8 in. (273 mm)
  • Automatic fill and water level regulation of tank
  • Slide out integrated front controlpanel provides easy access for technical service
  • Front mounted electronic control panel with digital temperature displays

1 year parts and labor.

Specifications
Equipment Type Glass Washers
Brand Jet-Tech
Rack capacity 15.75" x 15’75" (400mm x 400mm)
Total cycle 2-3-4 minutes
Hourly production 30/20/15 racks/hr. (1080/720/540 glasses/hr.)
Wash tank capacity 2.9 U.S. Gallons (11 Litres)
Booster capacity 0.79 U.S. Gallons (3 Litres)
Wash temperature

150°F (65°C) minimum / controlled electronically

Final rinse temperature 185° - 194°F (85° - 90°C) minimum / controlled electronically
Incoming water temperature Minimum 122°F (50°C)
Incoming water pressure 30 p.s.i. (2 bar)
Water consumption per cycle @ 30 psi 0.52 U.S. Gallons (2 Litres)
Washing pump power 0.4 H.P.
Power supply 208V/60HZ
Tank Heating Element 2.0 KW
Booster Heating Element 2.4 KW
Maximum power rating 2.80 KW - 13.5 amps
Dimensions
Width 20.5"
Height 29.5"
Depth 20.5"
Shipping Weight 106 lbs.
Read more

All products are covered with a Standard Manufacturer's Warranty, which varies from 1 Year up to 5 Years for Parts and Labor.

We offer an extended warranty provided by a 3rd part company CPS.

Contact us to get more information.

Call: 386-260-5002

Free Domestic Commercial Delivery and Customer Pickup (Warehouse)

We offer FREE delivery of all equipment to any business within the 48 States of America. Except Hawaii, Alaska, Puerto Rico & Canada.

Free Shipping to Businesses Address

Free Shipping promotions are valid for the 48 States of the United States only and do not apply to shipments to Hawaii, Alaska, Puerto Rico & Canada. 

Do you ship to a non-business address?

Yes, we ship to both residential and business addresses.
Please note the fees applied for residential addresses and freight accessories.

Below are the rates:

Residential Address:   $75
Liftgate Service:          $75
Inside Delivery:           $50

How to change a delivery address?

Please contact our customer support team to manually update the information. Note, that once the item is shipped we will not be able to update the delivery address. 

How many days to receive an order?

We process orders in 1-2 business days, it may take 4-7 days for the package to get delivered depending on the freight company. 

Freight DamageThe consignee MUST check the cargo and if any damage is on the pallet, or packaging, refuse the cargo before signing the Bill of lading. If there are any signs of damage or issues with the shipment make sure to note it on the Proof of Delivery (POD).

Freight damages must be reported to us within 48 hours from the receipt date. Make sure to provide type of damage, piece count, model number, and include some pictures when getting in contact with us to claim freight damages.

Freight delivery Incomplete or re-routingIf the carrier cannot complete the delivery for missing contact, wrong address provided, or any other reason, the customer will be charged a 25% restocking fee and all shipping return costs (full pricing quoted by the carriers). If the customer wants to change the delivery address, all the re-routing or re-consignments, storage, and related fees will be charged to the customer. 

It is important to communicate with our support line if any shipping or delivery issue arise. 

How to return an item?

We accept the return of a product that is not used, non-customized of up to 7 days from the receipt of order. Returns after 7 days  are not accepted.  Items must be returned unused, in original packaging Custom built products such as ranges with special options or built to order products cannot be canceled or returned as these will be custom built to order specifically for you. You will be sent a Special Order disclaimer to approve if your equipment is non-returnable.   We cannot accept returns of used or damaged equipment.  

Refusal of damaged shipment is not considered a return, please refuse any shipment that arrives with unacceptable damage

Return shipping should be paid by buyer unless it is refused due to damage. If your product arrived crated, it must be returned crated in order to ensure that it arrives safely. Free shipping offers do not apply to return shipping. Performance issues must be remedied through a warranty and shall not be used as a basis for non-payment. All equipment should be inspected for damage and if the damage is found, refuse it.

Return process:

  1. You let us know that you would like to make a return.
  2. We provide you with an Return Authorization (RA) Number and the warehouse address where the item will be restocked.
  3. You ship the product back in its original packaging along with the RA number written on the shipment
  4. The item arrives in the warehouse and is inspected upon arrival
  5. You are refunded back to the original payment method used to make your purchase

You will be refunded your product purchase price minus the original shipping cost and the restocking fee which can range from 25% - 35% depending on the product purchased

Special Order and Built-to-Order Equipment

Special Order or built-to-order items that are not stocked are not returnable as these items will have been made specifically for you. We ask that any buyers be sure of their purchase before they buy, as returns or cancellations would be expensive and impractical. Please take measurements and review the specs of your item before you order.

COM (change of mind) Return Policy

The product must be unopened and in brand-new condition, with the return to be organized by the customer. Once received and verified to be in the condition specified, the refund is only of the item value minus 25% - 35% restocking fee (not including initial shipping). An additional return charge, which is the same cost as that of initial shipping, will be deducted from the refund on returns due to a delivery failure caused by customer error. For the health and safety of our staff and other customers, we cannot accept personal-use items returns.

When can I get my refund?

As soon as the returned item is received, a special team will evaluate the item to assess the restocking fee amount. We process refunds within 3-5 business days from the date the item is received. 

FREE SHIPPING

across USA except for Canada & Hawaii

CALL FOR DISCOUNTS

guaranteed best price in the market

24/7 SUPPORT

connect with us at any time at
386-260-5002

What our customers are saying:

Outstanding service, from my first call up to my order delivery, superb service and great products.

Justin - Bar Owner

Amazing customer service. They really made sourcing equipment a breeze. I'm thankful to Amanda and her team.

Sally - Cafe Owner

Reliable and efficient. Made our procurement process much easier and more affordable.

Maria - Restaurant Owner

Lowest prices indeed! Outfitted my coffee shop under budget. I am recommending Top Restaurant Supplies.

Peter - Coffee House Owner

Unbelievable range found the exact coolers and displays needed for our grand opening!

Mike - Restaurant Owner